Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX1800 rejects incoming calls
On Wed, 12 Aug 1998, Kevin A. Smith wrote:
> At 09:38 AM 8/10/98 -0700, Geoff White wrote:
> >
> >I have a MAX 1800 running 6.0.0 with 4 BRIs (5 ESS switch with Hational
> >ISDN).
> >
> >I can place outgoing calls just fine, but I can't receive any incomming
> >calls, the
> >show isdn 1
> >shows...
> >NL: CALL REJECTED/OTHER DEST: 8127868
> >
> >where 8127868 is the first number in the hunt group (the number people
> >dial into), When I put a pipeline 85 on the same line(s) they are able to
> >receive calls just fine. I've poured over the configuration over and over
> >and, to the best of my knowledge, my config is the same as my own Max here
> >at v-site which has been operating for years, the differences are that the
> >v-site MAX is running 6.0.4+ and operating off of a DMS-100 switch
>
> As long as this is configured as a hunt-group, the numbers on the MAX for
> "mynum" on each channel are not needed - and indeed in this scenario will
> cause problems. Try removing the numbers from the line configurations. DO NOT
> remove the SPID information however, as that is needed in any case.
>
> I think we may still need to investigate further, but this may well fix
> the problem for now at least.
Here is how you need to have it set up:
Pri Num=6039240
Pri SPID=61260390161111
Sec Num=6039240
Sec SPID=61260390171112
Even though your SPIDs are different, your Pri Num/Sec Num must reflect
the lead number.
Works great for me...
Dale
-------------------------------------------------
Dale Henninger 817 Vandalia St.
pcOnline Internet Services St. Paul, MN 55114
612/647-6774 Voice 612/647-5956 Fax
daleh@pconline.com http://www.pconline.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: