Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX1800 rejects incoming calls
On Wed, 12 Aug 1998, Kevin A. Smith wrote:
> At 09:38 AM 8/10/98 -0700, Geoff White wrote:
> >
> >I have a MAX 1800 running 6.0.0 with 4 BRIs (5 ESS switch with Hational
> >ISDN).
> >
> >I can place outgoing calls just fine, but I can't receive any incomming
> >calls, the
> >show isdn 1
> >shows...
> >NL: CALL REJECTED/OTHER DEST: 8127868
> >
> >where 8127868 is the first number in the hunt group (the number people
> >dial into), When I put a pipeline 85 on the same line(s) they are able to
> >receive calls just fine. I've poured over the configuration over and over
> >and, to the best of my knowledge, my config is the same as my own Max here
> >at v-site which has been operating for years, the differences are that the
> >v-site MAX is running 6.0.4+ and operating off of a DMS-100 switch
>
> As long as this is configured as a hunt-group, the numbers on the MAX for
> "mynum" on each channel are not needed - and indeed in this scenario will
> cause problems. Try removing the numbers from the line configurations. DO NOT
> remove the SPID information however, as that is needed in any case.
>
> I think we may still need to investigate further, but this may well fix
> the problem for now at least.
>
I'll try this Kevin but I doubt it, I have a max configured in a hunt
group that works just fine, and it has the numbers in it, I did find this
tid bit in the max that doesn't work however...
Data Call... Not Installed
The max that works fine doesn't have this entry in the 00-100 Sys Option
window. Also the one that works is runnning 6.0.4+
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: